The Maco from Kanmido is a washi tape holder that you can refill with your favourite masking tapes so that you can use them on the go.
1. Prepare your choice of 15mm masking tape, a small tape roll and a tape roll core.
2. Place the komaki core onto the small spool as shown in the photo.
3. Hold the small winder and tape as shown in the photo, and attach the end of the tape horizontally to the core of the spool.
4. Hold the small winder firmly between your fingers and, without moving the small winder, turn the tape to wind the tape onto the spool.
5. When the outer diameter of the wound tape and the small winder are about the same, cut or tear off the end of the tape.
6. Remove the rewound small roll of tape from the small roll holder, and you're done!
7. When inserting the tape into the device, hold the end of the tape and insert it from the bottom as shown in the photo.
8. A maximum of four small rolls of tape can be set into the Maco washi tape holder.
How to Remove the Top Cap
How to Wrap and Use
How to Wind 18 or 20mm Width Washi Tapes
